LED Display Common Installation Methods

The installation and commissioning of the LED electronic display can not only reflect the quality of the product, but also determine the effect of the display during use. There are generally five types of installation methods:

1. Inlay installation

Suitable for small indoor screens. Due to the small installation space, in order not to occupy the space, the same size area is dug on the wall according to the size of the screen, and the LED electronic display is embedded into the wall. The wall is required to be a solid wall. The cost of pre -maintenance is high.

2. Hanging installation

It is mostly suitable for large places such as station LED electronic display and airport LED electronic display screens. The screen area is required to be small (below 10 square meters), and the place where it must be installed must be required. If there are beams or cross beams above, the screen body must be added under the condition.

3. Wall -mounted installation

It is mostly suitable for the installation of indoor LED electronic display, with a smaller area (below 10 square meters). The wall requirements are real walls. The hollow brick or simple transmission wall is not suitable for this installation method.

4. Roof type installation

It is mainly suitable for outdoor advertising LED electronic display. The installation location is mainly the roof of the building. With the increase of the height of the building, the windproof level must also be considered as it increases.

5. Pillar installation

Mostly used for the installation of outdoor advertising LED electronic displays. The field of vision is wide and the surroundings are relatively empty, such as squares, parking lots, etc. According to the size of the screen body area, it can be divided into single -column and double -column installation.