What Are The Installation Methods Of Full Color LED Display

1. Built-in type: add a steel structure to the wall, and then use the steel structure as a support to embed the outdoor full-color LED display, mainly because the installation site is the outer wall of the building. The wall is required to be a solid wall. The cost of pre-maintenance is higher.

2. Hoisting type: mainly use the designed steel structure to hang the outdoor LED screen body on the structure. It is mostly suitable for large-scale places such as station LED electronic display screens and airport LED electronic display screens to play the role of signage. In the case of temporary use of outdoor LED display screens, the hoisting method has obvious advantages.

3. Step type: It is mainly to install a two-color LED display screen or a full-color screen, a high-density LED screen, etc. on the facade of the steps, and the observation distance is generally 3 meters away.

4. Column type: Since there is no surrounding wall or available support points, the column type installation method has higher requirements on the steel structure and is the most common installation method. It is mostly used for the installation of outdoor advertising LED electronic display screens, with wide field of vision and relatively open surrounding places, such as squares, parking lots, etc. According to the size of the screen area, it can be divided into single-column and double-column installation.

5. Wall-mounted type: generally make a force point on the wall, hang the outdoor LED full-color screen on the wall, and use the wall as a fixed support. It is mostly suitable for the installation of indoor LED display screens, with a small area (less than 10 square meters), and the wall requirements are solid walls, and hollow bricks or simple partition walls are not suitable for this installation method.